100% Guaranteed Results 2V0-41.20 Unlimited 95 Questions [2023]
2V0-41.20 Dumps PDF - Want To Pass 2V0-41.20 Fast
To prepare for the VMware 2V0-41.20 exam, candidates can take advantage of various resources, such as self-paced training, instructor-led training, and practice exams. VMware also provides a detailed exam guide that outlines the topics and skills that are covered in the exam.
VMware 2V0-41.20 is an exam designed for professionals who want to demonstrate their skills in VMware NSX-T Data Center technology. It is a certification exam conducted by VMware, a leading provider of virtualization software and services. This exam is intended for those who have already gained knowledge of NSX-T Data Center technology and want to validate their skills.
Professional VMware NSX-T Data Center 2V0-41.20 Certification Path
Before applying for Professional VMware NSX-T Data Center 2V0-41.20 Certification, applicants are required to have at least 6 months of experience with Linux and KVM. Another 1 year experience with VMware vSphere and its command line is required as an official prerequisite for this exam. However, the recommended knowledge and experience required is discussed in detail in the “Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam” section of this document. Kindly refer to this section for more information.
NEW QUESTION # 11
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A. SSL
- B. HTTPS
- C. SSH
- D. TCP
- E. TLS
- F. UDP
Answer: D,E,F
Explanation:
Reference:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-prep-guide.pdf
NEW QUESTION # 12
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?
- A. esxcli network firewall ruleset set -r sysloq -e false
- B. esxcli network firewall ruleset -e syslog
- C. esxcli network firewall ruleset set -r syslog -e true
- D. esxcli network firewall ruleset set -a -e false
Answer: C
Explanation:
Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf
NEW QUESTION # 13
A user is assigned these two roles in NSX Manager:
LB Admin
Network Engineer
What privileges does this user have in the system?
- A. full access permissions on all networking services and read permissions on load balancing features
- B. read permissions on all networking services and full access permissions on load balancing features
- C. full access permissions on all networking services and full access permissions on load balancing features
- D. read permissions on all networking services and read permissions on load balancing features
Answer: C
NEW QUESTION # 14
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can have a maximum of 8 edge nodes
- B. must contain only one type of edge nodes (VM or bare metal)
- C. can have a maximum of 10 edge nodes
- D. must have only active-active edge nodes
- E. can contain multiple types of edge nodes (VM or bare metal)
Answer: C,E
Explanation:
Explanation
NEW QUESTION # 15
Which discovery protocol is supported for hypervisor transport nodes?
- A. Cisco Discovery Protocol
- B. Neighbor Discovery Protocol
- C. Adobe Real-time CDP
- D. Link Layer Discovery Protocol
Answer: D
NEW QUESTION # 16
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. vm-support
- B. get support-bundle file vcpnv.tgz
- C. esxcli system syslog config logger set --id=nsxmanager
- D. set support-bundle file vcpnv.tgz
Answer: B
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION # 17
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. 1:1 NAT
- B. Reverse NAT
- C. DNAT
- D. SNAT
Answer: D
NEW QUESTION # 18
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Deployment
- B. Service Consumption
- C. Service Insertion
- D. Service Registration
- E. Service Introspection
Answer: A,B,D
Explanation:
Use these steps to configure north-south and east-west Network Introspection:
1. Service Registration: Service registration makes a service available in the catalog.
2. Service Deployment: Deploy an instance of a registered service.
3. Service Consumption: Use services in a service chain and redirect traffic.
Taken from NSX-T ICM 3.0 Lecture Manual.
NEW QUESTION # 19
Which two tools are used to configure centralized logging in NSX-T Data Center? (Choose two.)
- A. Syslog Server
- B. vRealize Automation
- C. vRealize Log Insight
- D. vRealize Operations
- E. vRealize Network Insight
Answer: A,C
NEW QUESTION # 20
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast is supported in ESXi and KVM transport nodes.
- B. Multicast routing is implemented with PIM Sparse-Mode.
- C. An Edge can be the Rendezvous Point.
- D. Tier-0 gateways can be the Rendezvous Point.
- E. IGMP Snooping is used to populate multicast forwarding tables.
Answer: B,E
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION # 21
Which is correct when deploying a NSX Edge in a KVM only environment?
- A. deploy NSX Edge VM with ISO image
- B. deploy NSX Edge VM with QCOW2 image
- C. deploy NSX Edge on a bare-metal server
- D. deploy NSX Edge VM with OVF template
Answer: C
NEW QUESTION # 22
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- B. vrf 1
- C. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- D. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- E. vrf 3
- F. vrf 4
Answer: A,E
NEW QUESTION # 23
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast is supported in ESXi and KVM transport nodes.
- B. Multicast routing is implemented with PIM Sparse-Mode.
- C. An Edge can be the Rendezvous Point.
- D. Tier-0 gateways can be the Rendezvous Point.
- E. IGMP Snooping is used to populate multicast forwarding tables.
Answer: B,E
NEW QUESTION # 24
Which two choices are solutions of the NSX portfolio (Choose two.)?
- A. Tanzu Kubernetes Grid
- B. NSX Service Mesh
- C. vRealize Automation
- D. NSX Distributed IDS/IPS
- E. vRealize Network Insight
Answer: B,D
NEW QUESTION # 25
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Deployment
- B. Service Registration
- C. Service Introspection
- D. Service Consumption
- E. Service Insertion
Answer: A,C,E
NEW QUESTION # 26
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
join management-cluster <nsx-cluster-IP> username admin password <admin-
- A. password> thumbprint <nsx-manager-thumbprint>
join cluster <nsx-cluster-IP> username root password <root-password> - B. password> thumbprint <nsx-manager-thumbprint>
- C. thumbprint <nsx-manager-thumbprint>
join management-plane <nsx-nanager-ip> username admin password <admin- - D. thumbprint <nsx-manager-thumbprint>
join policy-manager <nsx-manager-ip> username root password <root-password>
Answer: B
NEW QUESTION # 27
Where are Distributed Firewall logs containing access decisions stored?
- A. NSX Manager
- B. NSX Edge
- C. NSX API
- D. Hypervisor transport node
Answer: D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html
NEW QUESTION # 28
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. BGP Neighbors
- B. Graceful Restart
- C. Route Aggregation
- D. Route Distribution
- E. Local AS
Answer: A,C
Explanation:
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
NEW QUESTION # 29
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get transport-node tunnel state
- B. get host-switch <Host-Switch-Name> tunnels
- C. get transport-node tunnel status
- D. get host-switch <Host-Switch-Name> tunnel status
Answer: B
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION # 30
......
Updated Verified 2V0-41.20 Q&As - Pass Guarantee: https://examkiller.testsdumps.com/2V0-41.20_real-exam-dumps.html
