[Nov-2023] Latest SAP C_IBP_2305 exam dumps and online Test Engine
SAP C_IBP_2305: Selling SAP Certified Application Associate Products and Solutions
SAP C_IBP_2305 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 24
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.
- A. Simulate statistical forecast at the Demand Review stage
- B. Simulate heuristics run in Supply Review stage
- C. Simulate demand sensing inputs for Supply Review
- D. Model inventory turns based on Target Safety stocks
Answer: A,B
NEW QUESTION # 25
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.
- A. Recommended Safety Stock
- B. Target Pipeline Stock
- C. Component Usage
- D. Reorder Point
- E. Target Cycle Stock
Answer: A,B,E
NEW QUESTION # 26
Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.
- A. Trend Chart Types
- B. Seasonal Chart Types
- C. Comparison Chart Types
- D. Geographic Chart Types
- E. Simulation Chart Types
Answer: A,B,C
NEW QUESTION # 27
You have to be logged on to two separate SAP IBP tenants.What can help you differentiate the appearance of their user interfaces?Note: There are 2 correct answers to this question.
- A. Add the system name and tenant information from the About section to the Home page.
- B. Having a different set of tiles in the Home group of apps.
- C. Defining a different default planning area via the User Preferences.
- D. Setting a separate theme for the Home page in the Web UI.
Answer: A,D
NEW QUESTION # 28
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCECUSTGROUP
- B. SOURCECUSTOMER
- C. SOURCELOCATION
- D. SOURCEPRODUCTION
Answer: B,C
NEW QUESTION # 29
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Avoid using telescopic time buckets.
- B. Increase the use of incremental lot size beyond the frozen horizon.
- C. Split into multiple planning areas to support weekly vs. daily planning needs.
- D. Keep the number of fairshare segments small.
- E. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
Answer: A,C,E
NEW QUESTION # 30
How many different time levels can be selected within one planning view?
- A. All time levels available in the time profile
- B. Only base time levels of the planning area
- C. All time levels available in the time profile, restricted by global configuration parameter
- D. Only time levels from the base planning level of selected key figures
Answer: A
NEW QUESTION # 31
You are modeling a new product introduction.Which of the following steps can be part of your modeling process in the Manage Product Lifecycle app?Note: There are 2 correct answers to this question.
- A. Enter the Phase-out Start Date and Phase-out End Date
- B. Create planning objects for new combinations in the app
- C. Copy the launch dimension from the reference product to the new product
- D. Enter the product family to which the new product belongs
Answer: B,C
NEW QUESTION # 32
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.
- A. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
- B. Filter blocks are imposed when modeling cross-period calculations.
- C. Filter blocks are imposed when modeling an attribute as a key figure.
- D. Filter blocks are imposed when modeling attribute transformations.
- E. Filter blocks can be visualized in the Key Figure Calculations app.
Answer: A,C,D
NEW QUESTION # 33
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are 2 correct answers to this question.
- A. Time series analysis
- B. Scenario analysis for operational supply planning
- C. Multi-Level Supply Planning Heuristics
- D. Simple statistical forecast
Answer: C,D
NEW QUESTION # 34
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Create additional test planning areas in the production system to support cutover needs.
- B. Set up a three-tier landscape using transport, starting from the development system to test and production.
- C. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
- D. Create additional planning areas in the test system to support training needs.
Answer: B,C
NEW QUESTION # 35
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Key Figure Data
- B. Purge Non-Confirming Data
- C. Purge Master Data
- D. Purge Key Figure Data Outside Planning Area Planning Horizon
Answer: A
NEW QUESTION # 36
Which features apply to quota violations modeled with the optimizer?
- A. Quotas can be modeled for sourcing location, production, and consensus demand.
- B. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
- C. Min and Max Quotas have to be the same as sourcing ratios.
- D. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.
Answer: D
NEW QUESTION # 37
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note:
There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- B. Splitting the values from aggregated to detailed level, based on the time profile attribute
- C. Splitting the values from detailed to aggregated level by using a copy operator
- D. Splitting the values from aggregated to detailed level using multiplication by the proportions
Answer: A,D
NEW QUESTION # 38
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.
- A. Number of local members and complexity of calculations
- B. Complex calculation graphs for key figures
- C. Excessive SAP IBP formatting in the Microsoft Excel UI
- D. Number of analytics charts displaying key figures' values
Answer: B,C
NEW QUESTION # 39
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Leveraging the functionality of SAP Workzone
- B. Leveraging the web-based planning capability
- C. Using Microsoft Excel planning views
- D. Using Driver-Based planning
Answer: B,C
NEW QUESTION # 40
You need to integrate data from SAP S/4HANA and legacy ERP to SAP IBP.What are the integration tools that you can use with such a setup for data transfer?Note: There are 2 correct answers to this question.
- A. Cloud Integration for Data Services
- B. Smart Data Integration
- C. Cloud Identity Authentication Service
- D. Real-time Integration
Answer: A,B
NEW QUESTION # 41
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.
- A. You must mark the realignment step as "shared" and assign the steps to users.
- B. The number of steps in the realignment run is limited to 255.
- C. The name of the realignment step should be no longer than 20 characters.
- D. A realignment step can change master data, planning objects and key figures.
Answer: A,D
NEW QUESTION # 42
Where can the results of a Time Series Analysis be used?Note: There are 2 correct answers to this question.
- A. In the Microsoft Excel add-in, where you can use them to limit and filter your planning views
- B. In Global (multi-stage) Inventory Optimization to calculate time-phased Recommended Safety Stock Outputs
- C. During XYZ segmentation in the Manage ABC/XYZ Segmentation Rules app
- D. In the Manage Forecast Error Calculations app - Demand Planning app to calculate the Forecast Error CV
Answer: B,C
NEW QUESTION # 43
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used at any level of calculation level except the Request Level
- B. Used by end-users in planning views to help visualize cross-period calculations
- C. Used when you have more than three inputs at different planning levels in one calculation
- D. Used to break down a large calculation into manageable subcalculations
Answer: C,D
NEW QUESTION # 44
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Users should have authorization for template administration.
- B. Use Excel Cell References in the Report Editor option is selected.
- C. Activate Local Member Recognition setting is selected.
- D. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
Answer: A,C
NEW QUESTION # 45
What are the S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments Additional tiering costs (default) Inventory days of supply
- B. Number of fair share segments Maximum days of coverage Number of fair share segments late delivery
- C. Number of fair share segments Additional tiering costs (default) Number of fair share segments late delivery
- D. Number of fair share segments Additional tiering costs (default) Maximum inventory
Answer: C
NEW QUESTION # 46
What function would you use to configure a year-to-date calculation?
- A. Cumulative Aggregation
- B. Rolling Aggregation
- C. Last Period Aggregation
- D. Dynamic Rolling Aggregation
Answer: A
NEW QUESTION # 47
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. A planning area with its time profile must be bundled in one collection.
- B. Configuration items should be bundled in the collections based on the SAP IBP project stream.
- C. A planning area with the copy operators assigned must be bundled in one collection.
- D. You should delete collections after they have been transported.
Answer: A,C
NEW QUESTION # 48
......
New 2023 C_IBP_2305 Test Tutorial (Updated 86 Questions): https://examkiller.testsdumps.com/C_IBP_2305_real-exam-dumps.html
